Pavistone PLUS FINO Thixotropic Mortar

APPLICATIONS

Themed stone carved ashlar, rock ... Rehabilitation of facades and walls. Crowning of pools with multiple finishes and imitations. Great resistance and durability Waterproof and breathable

SUPPORTS

On mesh and metal structure, precast elements, brick cladding, concrete, concrete block ...

RECOMMENDATIONS FOR APPLICATION

In preparing the mortar, use the same percentage of water and mixing time in order to avoid sagging of the mortar at thicknesses greater than 5 cm. Application temperatures between 5 and 35ºC, in dark tones can increase deformations and formation of lime. Depending on the desired thickness, place fiberglass or metal mesh centered in the center of the coating. In cold weather, the HORMIDUR-100 mortar setting accelerator can be used.

EXECUTION CONDITIONS

Placing fiberglass or metal mesh in areas at risk of cracking. The supports must be flat, healthy, stable and resistant, free of dust, plaster, paint ... In hot weather and dry wind, a humidification of the facing must be carried out before and 24 hours after the application of the coating, to favor the curing of the monolayer and avoiding the appearance of cracks and cracks, as well as the formation of dusty areas. The higher the temperatures, the more these phenomena intensify. On surfaces without absorption, concrete walls ... use F-300 quick primer or F-800 bonding bridge. Avoid applying the coating in low temperatures, strong humidity, rain or ice. In the hours following the application of the monolayer, the risk of the appearance of efflorescence due to carbonation increases.

HOW TO USE

For projected with a machine, the percentage of water will be 17% of the total mass.

• Manual kneading:
  Mix a bag of Pavistone (25kg.) With 4.5 - 5 liters of clean water until you get a homogeneous mass.

Molding or sculpting once the mortar begins the setting process to give the desired shape with the different utensils.

After the final sculpting and setting, it can be pigmented with F-600 Color to achieve the desired effect.

• If it is necessary to apply 1-2 passes of Orfapol Colorless .

• OBSERVATIONS

• Do not add any additive to the mortar.
• On metal forms and reinforcement, the first layer of mortar will be denser in order to facilitate penetration into the mesh holes.
• On old supports of mortar, stone, brick, degraded facades ... it is important to eliminate the existing mortar in its entirety, cleaning the support with pressurized water or sandblasting.
• The works carried out with these mortars do not guarantee the sealing function.
• Not suitable with temperatures <5ºC

Special thematization Excellent hardness Ideal for spraying machine Waterproof and breathable Thicknesses up to 25 cm.

EMPLOYMENT CHARACTERISTICS

Rest time after kneading: 5 min. Maximum tolerated thickness: 20-25 cm. Maximum thickness per layer: 5 cm. Time of use of the mixture between 30 and 60 minutes.

These times can vary considerably depending on the ambient temperature.

PERFORMANCE Powder density: 1.3 g / cm ³ Mass density: 1,890 kg / cm ³ Density of the hardened product: 1,887 kg / cm ³ Flexural strength: 4.4 N / mm ² Compressive strength: 15.1 N / mm ² Retention of water: 97% Elastic modulus: 10,082 MPa Determination of the PH: 12.1

* These results may vary according to the installation conditions.

PRESENTATION

25 kg paper bags. anti humidity.
1,200 kg pallets (48 bags)

COLORS: White - Gray and Beige (Other colors on minimum order)

YIELD: 14 - 17 kg / m ² and cm thickness

STORAGE: 12 months from the date of manufacture, in closed original container and protected from moisture.