Mortecril Line

APPLICATIONS

High performance synthetic mineral cladding for the decoration of all types of facades in exteriors and interiors. New or renovation work Water and dirt repellent Anti-mold-anti-verdin On walls and ceilings Compatible with most supports.

SUPPORTS

Revex Plus , concrete, Revistamp monolayer mortar, wood and plaster ... On supports already painted or old coatings, in restoration in good condition and perfectly adhered to the support.

RECOMMENDATIONS FOR APPLICATION

Application temperatures between 5 and 30ºC Do not apply in direct sun, rain or frost risk. Use adhesive tape to make work meetings. Protect all areas where product splashes may occur, such as windows, floors ...

EXECUTION CONDITIONS

The substrates must be flat, healthy, stable and resistant, free of dust, loose particles, remnants of old paints, oils ... On highly absorbent or easily disintegrable substrates, previously apply a layer of primer F -300 diluted with water (1 part F-300 , 3 parts water Apply in all cases a primer pass of Primer Mortecril and thus avoid possible transparencies, after 24 hours the rustic Mortecril can be applied. Use adhesive tape to delimit the work joints or decorative pieces.)

HOW TO USE

The product is supplied ready to use, up to 1 liter of water can be added per container and the content can be stirred until the paste is completely homogenized.

Apply Mortecril with a spray gun, to obtain a drop or iron finish with a plastic spatula.

Trowel finish: Spread the product manually with a trowel and trowel when it has the right consistency.

Use adhesive tape to make the work joints or any imitation of brick, stone ...

In the case of applying in large areas, prevent additional labor to avoid the appearance of not interrupting the application once it has begun, unless a work or decorative joint can be made ...

• OBSERVATIONS

• Do not apply on horizontal or inclined surfaces less than 45º.
• Protect the upper edges of the covering against the penetration of rainwater.
• Do not add any additive to the mortar.

Finished with trowel-drop Excellent adherence Anti-mold-anti-greening Aging resistant Washable Color range

EMPLOYMENT CHARACTERISTICS

Application thickness of 2 to 3 mm per coat. Cocking time: 20-30 min. approximately and depending on atmospheric conditions. Dry to the touch: 6-7 hours Total hardening time: 16-17 hours

* These times can vary considerably depending on the ambient temperature.

BENEFITS

Paste density: 1,905 kg / m ³ Drying retraction: 4.50 mm / m Capillary water absorption: 0.04 kg (m2 min 0.5) Adhesion: 2.00 N / mm ² Fire behavior: non-combustible

* Tests according to CE Standard
* UNE-EN1015, these results may vary according to the conditions of installation.

-

PRESENTATION: 25 kg drums. - 600 kg pallets (24 drums)

CONSERVATION

12 months from the date of manufacture, in the original closed container, sheltered from the elements and humidity.