Micropol 3C Fine Micro Mortar

Description of the Micropol 2C decorative polyurethane mortar

This two-component micro mortar has great qualities for decorative coatings, both indoors and outdoors, with a wide variety of colors and high mechanical resistance, resistance to abrasion and excellent resistance to UV rays and atmospheric agents.

Qualities of the MicroPol 2C mortar

Two-component mortar (A + B) in fine granulometry, with water-based aliphatic polyurethane resins.

• Great adherence on resin coatings.
• Does not yellow.
• Excellent mechanical resistance.
• Abrasion high resistance.
• Excellent resistance to UV rays and atmospheric agents.
• Indoors and outdoors.

MicroPol 2C mortar performance

Specific gravity (25ºC): 180+ / -0.05g / ml.
Viscosity (25ºC): thixotropic paste.
Dry residue: 84.3% by weight and 50% RH.

* These results are from standard tests and may vary depending on the on-site conditions.

Application and method of use of MicroPol 2C

Mix the components A + B with a whisk at low revolutions for at least 1 minute, until obtaining a perfect homogenization. The application can be carried out with a steel trowel, rubber ... Prepare the mixture of the 2 components (A + B) pour the content of component B into the container of component A, stir the mixture and homogenize with the drill at low revolutions . Apply the product with the appropriate trowel at an approximate consumption of 450 - 550 g / m² per coat. To color the product use water-based dyes, the amount of dye with respect to the product (A + B) can vary from 3% to 10%, depending on the desired color effect.

Uses of the MicroPol 2C product

Coating with "spatulate" effect for exterior surfaces.
Pavements and coatings in light colors.

MicroPol 2C Support Information

The support must have a minimum mechanical resistance to compression of 25 N / mm2 and tensile strength of 1.5 N / mm2. The concrete supports must be solid, dry, level, absorbent, not contaminated with oils, detergents, powders or other substances.

• On new setting concrete> 28 days.
• Evaluate the most convenient type of mechanical preparation (using an abrasive machine, polishing machine or hydro-cleaner) and apply one pass of Transparent Paviplast Epoxy.

Important product information for MicroPol 2C

Colors with shades of yellow, orange or red may require more applications to achieve a good coating effect (in some cases a first recovery of white is recommended). Multiple production batches may have slight color differences: If possible, use material from a single production batch. Some organic pigment-based colors (reds, blues, greens, and deep yellows) tend to fade when subjected to abrasion (either dry or wet). In these cases it is advisable to protect the color with a pass of transparent Paviplast Transparent finish.