Escríbeme un Whatsapp
  • Online only

Repair Plug Immediate Setting Cement

€297.30
Tax included
Ask a question (0)
Capacity
Quantity

Immediate setting cement without shrinkage or cracking to plug waterways and repair concrete
Packaging: 20 Kg cubes
Consumption: From 500 to 800 gr / m2 per layer applied as a surface and reinforcement treatment on the already prepared BASE COAT base.
Consumptions are theoretical and depend on the roughness of the support and other particular conditions of each work.
To determine the exact consumptions, preliminary tests must be carried out on site.

Specially designed mortar, based on high resistance hydraulic cements and hydro-reactive chemical substances, which provide an immediate setting without shrinkage or cracking to plug waterways and repair concrete.

Repair Plug, cuts leaks or water leaks even under pressure, in drinking water tanks, dams, underground structures, basements, elevator shafts, etc.

The essential characteristics of this mortar are enhanced by the crystalline hydrophilic technology of Therglass® Concrete

Properties

It just needs to be mixed with water.

Fast setting for 2 to 3 minutes at a temperature of 21ºC.

High adherence.

Slightly expansive during setting.

Immediately seal leaks or leaks of pressurized water.

Excellent mechanical resistance and hydrostatic pressure, either positive or negative.

Suitable for concrete and masonry constructions.

Durability similar to concrete and masonry to which it is applied.

Does not contain metallic elements.

It does not rust or deteriorate.

Protects armor against corrosion.

It can be used in underwater applications.

Suitable for use in contact with drinking water.

Free of chlorides and solvents.

Common applications

TherGlass® Concrete REPAIR PLUG, is especially indicated for:

Stop the active flow of water through fissures, cracks or defects in the substrate.

Repair concrete fixing holes and fill ant nests or holes in the concrete.

Seal leaks in constructive joints and around joints with pipes.

TherGlass® Concrete REPAIR PLUG, can be used in:

Foundations

Basements and parking lots

Tunnels and pipes

Foundations affected by soils with high sulfate or chloride content

Precast concrete elements.

Docks and bridges

Maritime and underwater works.

Elevator shafts

Screen walls, slabs or concrete screeds.

Constructive joints.

Hydraulic structures

Technical data

Appearance

Dark gray powder

Granulometric Interval:

0-1.2 mm

Apparent density:

1,268 ± 25 gr / cm3.

Layer thickness:

> 15 mm

Chloride ion content:

≤ 0.03%

Reaction to fire:

EuroClass A1

Application temperature:

Between 4 and 25 ºC

Initial setting at 25 ºC

1 to 3 minutes

Final setting at 25 ºC

4 to 9 minutes

Compressive strength:

24 hours> 15 Mpa

28 days> 30 Mpa

These results have been obtained in tests carried out under standard conditions, and may vary depending on the conditions of installation. Setting times may vary depending on weather conditions

Presentation

Therglass® Concrete Repair Plug is supplied in double-sheet kraft paper sacks with an intermediate polyethylene foil and in airtight plastic buckets, both in 25 kg.

LER_C_00054

Specific References

ean13
8435802011909


Be the first to write your review !

No customer questions for the moment.


Your Question has been successfully sent our team. Thanks for question!
Ask a question
hide form
Captcha