PAVISTAMP HD Colored Mortar

APPLICATIONS

High resistance colored mortar that is applied on fresh concrete and that allows the molding of the concrete offering a rolling layer of excellent hardness and durability. For the decoration of traditional pavements (cobblestone, wood ...) Especially suitable for urban pavements, homes, parking lots ...

FINISHES

More than 70 models A la carte models Printed, plain, scratched and trowelled

RECOMMENDATIONS FOR APPLICATION

Application temperatures 5ºC to 35ºC Do not add water to the product once it has been sprinkled on fresh concrete.

EXECUTION CONDITIONS

The base will be properly compacted and with the approval of the medical management, to receive the concrete. The thickness of the concrete in all cases will be decided by the construction management or the property. The concrete will be manufactured in an authorized plant and transported in trucks in Cuba within 30 minutes, it will have a cone of collapse between 6.5 and 8 cm, in order to avoid the rise of slag and segregation of granules. Avoid concretes with excess additives, these make it difficult for the water to rise due to capillarity, preventing the coupling between the concrete and the mortar.

HOW TO USE

• In the minutes following the regularization of the concrete, it is smoothed allowing the water to rise by capillary action and ensuring a perfect connection between concrete and mortar.
• Sprinkle the Padec product in 2 passes at a rate of 4-5 kg / m2 and according to color.
• Manual smoothing ensuring a perfect adhesion of the product with the concrete.
• With the concrete in a plastic state, the Despi is dusted, which acts as a release agent and aged the pavement. In the setting process, it is stamped with the chosen molds.
• After the first 48-72 hours, the floor is washed with pressurized water.
• Apply two coats of F-300 or F-250 sealing resin with the flooring free of puddled water.

OBSERVATIONS

Waiting times for application vary depending on the temperature, humidity and type of concrete. Protect all the areas where it can be stained (manholes, curbs, baseboards ...) with PROTECTOR PAVISTAMP . In hot or windy weather use BRYTEN CH surface retarder to control the rapid evaporation of moisture on the surface of fresh concrete and thus facilitate a perfect bond between mortar and concrete, avoiding the appearance of surface cracks. High resistance mortar Good abrasion wear behavior Wheeled and pedestrian traffic Decorative finishes

APPLICATIONS

High resistance colored mortar that is applied on fresh concrete and that allows the molding of the concrete offering a rolling layer of excellent hardness and durability. For the decoration of traditional pavements (cobblestone, wood ...) Especially suitable for urban pavements, homes, parking lots, theme parks ...

FINISHES

More than 70 models A la carte models Printed, plain, scratched and trowelled

RECOMMENDATIONS FOR APPLICATION

Application temperatures 5ºC to 35ºC Do not add water to the product once it has been sprinkled on fresh concrete.

EXECUTION CONDITIONS

The base will be properly compacted and with the approval of the medical management, to receive the concrete. The thickness of the concrete in all cases will be decided by the construction management or the property. The concrete will be manufactured in an authorized plant and transported in trucks in Cuba within 30 minutes, it will have a cone of collapse between 6.5 and 8 cm, in order to avoid the rise of slag and segregation of granules. Avoid concretes with excess additives, these make it difficult for the water to rise due to capillarity, preventing the coupling between the concrete and the mortar.

HOW TO USE

• In the minutes following the regularization of the concrete, it is smoothed allowing the water to rise by capillary action and ensuring a perfect connection between concrete and mortar.
• Sprinkle the Pavistamp product in 2 passes at a rate of 5-7 kg / m2 and according to color.
• Manual smoothing ensuring a perfect adhesion of the product with the concrete.
• With the concrete in a plastic state, the Despi is dusted, which acts as a release agent and aged the pavement. During the setting process, it is textured with the chosen molds.
• After the first 48-72 hours, the floor is washed with pressurized water.
• Once dry and free of moisture, apply 1-2 passes of curing resin :

• Racly 2: with humidity <4%.
• F-300: water based.

• OBSERVATIONS

• Waiting times for application vary depending on the temperature, humidity and type of concrete.
• Protect all the areas where it can be stained (manholes, curbs, baseboards ...) with PROTECTOR PAVISTAMP .
• In hot or windy weather use BRYTEN CH surface retarder to control the rapid evaporation of moisture on the surface of fresh concrete and thus facilitate a perfect bond between mortar and concrete, avoiding the appearance of surface cracks.

High resistance mortar Excellent freeze-thaw behavior Rolling and pedestrian traffic Decorative finishes

EMPLOYMENT CHARACTERISTICS

PAVISTAMP application by dusting in 2 passes on fresh concrete. The mortar must be completely integrated on the fresh concrete. Avoid wetting the concrete with water. In hot weather, delay the setting process of the concrete with FILMAT R. In winter time, accelerate the setting of the concrete with HORMIDUR-SC . After the first 24 hours approx. open expansion joints in cloths of maximum 16-20 m2.

BENEFITS

MARKING - CE UNE - EN 13813: 2003

Friction wear UNE 127.020 / 99EX: 19 mm. CRD slip: 41 Freezing: No freezing

CONSERVATION

12 months from the date of manufacture, in the original closed container, sheltered from the elements and humidity.

REFERENCES

Pavistamp HD : resistant to swimming pool salts.