Special cement, selected aggregates, resins, active components and additives.
Do not add cements, aggregates or water to the product.
On surfaces that the product is visible, the steam output will be taken into account as a function of the humidity present in the support. This precaution is essential in that the application is carried out on absorbent supports that retain moisture.
After application in times of heat or wind, it is advisable to protect the surface with tarps so that evaporation or drying does not occur too quickly.
Rest time after kneading: 5 min.
Pot life: 60 minutes.
Application thickness: 2 mm per coat.
Start of setting: 4 hours.
Waiting time between coats: 4-5 hours.
Waiting for tank filling: ≥28 days.
Coated - painting:> 6 days.
* These times are contemplated at 20ºC and may vary depending on the ambient temperature
Dosage: Comp. A + B (25 kg and 12 liters) .
Direct tensile adhesion: 1.7 MPa .
Permeability index: 0.03 kg / m 2 h 0.5 .
CO2 permeability: 4.5 g / m 2 · d .
Crack resistance: Class A5 .
Water-steam transmission: 1.9 mg / h .
Water-steam transmission speed: 4.9 g / m 2 * d .
Water-steam permeance coefficient: 6,4E-04 g / m 2 x day x Pa .