PAVIFLUID 200

APPLICATIONS

- Conventional self-leveling mortar with low density, normal setting and compensated retraction.
- For new construction and rehabilitation.
- To level and smooth thickness differences
between
10 - 60 mm.
- Indoor

SUPPORTS

- Concrete, existing pavement, tiles, terrazzo, ceramic ...
THICKNESSES / - From 10 to 60 mm.
- Types of finish: Micro-mortar Pavicem, Paints Paviplast (epoxy) - Carpet, parquet ... to the adhered.

EXECUTION CONDITIONS

- The support must be solid and hard, dry, free of dust, from disaggregated areas, paints, waxes and oils, oxides, traces of plaster ...
- Cementitious parts that are not solid should be removed or if possible reinforced with the F-600 consolidator.
- On anhydrous, very smooth or porous substrates applying a F-800 bonding pass or F-300 quick primer.
- In cracked or degraded concretes, clean before applying the Pavifluid-200 self-leveling with the appropriate mesh.
- On new concrete, it must be completely set, 28 days.

HOW TO USE

• Manual kneading:

1 bag of Pavifluid-200 with 5 - 5.5 liters of water, until obtaining a homogeneous mass and without lumps.

• Mechanical kneading:

For the mixing and spraying of Pavifluid-200 with a machine, the percentage of water will be approximately 20 - 22%.

* If necessary, smooth with a leveling trowel.
* Use the barbed roller to remove air from the product

COMPRESSION STRENGTH - FLEXION

- 1 days:

Compression: 5 N / mm2
Flex: 2.1 N / mm2

- 7 days:
Compression: 16 N / mm2
Flex: 4 N / mm2

- 28 days:
compression: 21 N / mm2
bending: 5 N / mm2

* These results are from standard tests and may vary depending on the on-site conditions

OBSERVATIONS

- Do not add any additive to the mortar.
- On absorbent surfaces, moisten before
apply the product.
- Do not use on supports subject to continuous
humidity lifts.
- Do not use for exterior leveling.
- Do not add water to the mixture that has already started the setting process.

EMPLOYMENT CHARACTERISTICS

- Application temperature: 5 - 35 ºC
- Mixing time: 2-3 minutes
- Rest time before applying: 2 minutes
- Life of the dough: 20 - 60 minutes
- Dry to the touch: 4 to 8 hours
- Sanding time: 12 - 48 hours
- Coating time: 2 to 5 days
• Pavicem., Epoxy resins ...: 7 days (maximum support humidity <4%)

BENEFITS

- Powder density 1400 ± 70kg / m3
- Paste density 2100 ± 70kg / m3
- Density of hardened product: 1,700 ± 1,750kg / m3
- Mixing water: 18%
- Minimum layer thickness: 10mm
* These results are from standard tests and may vary depending on the on-site conditions.

* These times can vary considerably depending on the ambient temperature.