Pavex 2C Epoxy Self Leveling

Pavex 2C Epoxy Self-Leveling Features

• 100% solids free of solvent.
• High chemical resistance.
• Excellent resistance to heavy wheeled traffic.
• Increases hardness and resistance against abrasion.

Features of use of the self-leveling Pavex 2C Epoxy

• Pot life: 25 minutes.
• Dried at 20ºC and 70% relative humidity.
  • Dry to the touch: 6-8 hours.
  • Total drying: 12 hours.
  • Total polymerization: 7 days.
• Cured:
  • Pedestrian traffic: 24 hours.
  • Traffic light elements: 2 days.
  • Forklift trucks: 5 days.
  • Total hardening: 7 days.
• Final appearance: porcelain

Pavex 2C Epoxy Self-Leveling Features

• Composition: Two-component epoxy resin.
• Specific weight of the mixture: 1.20 Kg / l
• Finish: gloss.
• Viscosity: 70 - 80 UD / KREBS.
• Persoz hardness: 200-230 sec.
• Abrasion resistance: 60-70 mg. (1000 cycles).
• Adhesion: superior to the cohesion of the concrete.
• Flex: 150 Kg / cm2 ASTM C-293-57T.
• Compression: 1000 Kg / cm2 ASTM C-306-55.
• Traction: 90 Kg / cm2 ASTM C-190-58.

Pavex 2C Epoxy Applications

• Watertight protection and waterproofing of industrial floors subject to heavy road and pedestrian traffic.
• Specially designed for the preparation of food-grade soils according to EC Regulation No. 852/2004 of April 29, 2004 chapter II
• It supports the continuous immersion of industrial, marine waters ...
• Suitable for application in chemical, food, refrigeration, wine, meat, dairy, pharmaceutical, canning and soil installations in corrosive atmospheres.
• Indoor
• Supports
  • Concrete
  • Mortar
  • Ceramics

Pavex 2C application recommendations

• Application temperatures: 10-30ºC.
• Maximum humidity of the support: 4%.
• Maximum relative humidity: 70%.
• Always respect the same percentages during mixing.
• Do not add water or any other additive to the mixture.
• Avoid splashing the product in the eyes and skin.
• Apply a first coat of PAVEX 2C PRIMER primer at a rate of 2-3 m2 / kg. Depending on the absorption of the support and its porosity, it is recommended to apply additional layers in order to completely seal all the pores of the support.
• In very irregular supports, the application of a regularization mortar composed of one part of PAVEX 2C PRIMER and 3 parts of Silica Sand of selected granulometry is recommended.