DECOSOL Printed Concrete Renovator Kit

€48.40

Tax included

Rate it

Ask a question (0)

Product customization

Don't forget to save your customization to be able to add to cart

Kits

Quantity

DECOSOL KIT of high-performance deformable colored cementitious paint for the renovation and decoration of porous surfaces such as printed floors, paving stones,

Depending on porosity and roughness of the support

Kits for 30 m2 and 100 m2 with all the necessary products for a correct application.

PRODUCTS THAT MAKE UP THE KIT 30 m2

1 GARRAFA of 5 Ltrs. F-300 (Union bridge and sealant)

1 BUCKET 5 Kgs. DECOSOL Component A (Color powder)

1 GARRAFA 5 Ltrs. DECOSOL Component B (Acrylic mixing liquid with component A)

PRODUCTS THAT MAKE UP THE 100 m2 KIT

1 CARTRIDGE of 20 Ltrs. F-300 (Union bridge and sealant)

1 BUCKET 15 Kgs. DECOSOL Component A (Color powder)

1 BUCKET 5 Kgs. DECOSOL Component A (Color powder)

1 GARRAFA 20 Ltrs. DECOSOL Component B (Acrylic mixing liquid with component A)

PRODUCTS THAT MAKE UP THE KIT 130 m2

1 GARRAFA 5 Ltrs. F-300 (Union bridge and sealant

1 GARRAFA 20 Ltrs. F-300 (Union bridge and sealant)

1 BUCKET 15 Kgs. DECOSOL Component A (Color powder)

2 BUCKET 5 Kgs. DECOSOL Component A (Color powder)

1 GARRAFA 5 Ltrs. DECOSOL Component B (Acrylic mixing liquid with component A)

1 GARRAFA 20 Ltrs. DECOSOL Component B (Acrylic mixing liquid with component A)

DESCRIPTION

- Special cement, selected aggregates, additives, resins and pigments.
- High performance deformable colored microcement for floor renovation and decoration.
- Suitable for pedestrian and road traffic.
- Minimum thickness (1-2 mm)
- no wear

FEATURES
- Colored continuous flooring
- Without joints
- Deformable and flexible
- Waterproof and breathable
- No abrasion wear
- High performance

APPLICATION SURFACES : On concrete slab, mortar, terrazzo, marble, ceramic, plaster, laminated plasterboard, wood, glass ...

RECOMMENDATIONS FOR APPLICATION
- Always respect the same percentage of acrylin during mixing.
- Do not add water to the product.
- Respect the expansion and retraction joints.
- Application temperature 5ºC to 35ºC
-
OBSERVATIONS
- Do not add water or any other additive to the mortar.
- On absorbent or porous surfaces, moisten before applying the product.
- Treat the singular areas (fissures ...) with fiberglass mesh.
- The drying time will vary depending on the existing temperature and humidity.

EMPLOYMENT CHARACTERISTICS
- Mix life: 3 hours
- Open time: 2 hours
- Maximum thickness: 0.1 - 2 mm
- Maximum thickness per layer: 0.5-1 mm
- Dry to the touch: 5-7 hours
- Commissioning: 24 hours
STORAGE: 12 months from the date of manufacture, in original closed container and sheltered from the elements.

YIELD: 170 g / m2 for 2 PASSES, depending on the roughness and porosity of the support.

Reference 750361