Rustic Mortecril acrylic mortar

Characteristics of the Rustic Mortecril

The Mortecril Rústico mortar is made of acrylic resins, silicates, fillers, mineral pigments and additives. Manufactured for application on both exterior and interior facades, it provides a water and dirt repellent coating, with anti-mold-anti-green properties. It can be used in new works or in rehabilitation works, on surfaces composed of concrete, conventional mortar, wood and plaster, as well as on Revistam-Sec.

Rustic Mortecril product.

• 24 color palette.
• 25Kg drum
• Rustic finishes.
• Excellent adherence.
• Anti-mold - antiverdín.
• Resistant to aging.
• Washable.
• Conservation for 24 months from date of manufacture, keep in original container protected from the elements and humidity.

Rustic Mortecril mortar observations

• Do not apply on horizontal or inclined surfaces less than 45º. Protect the upper edges of the covering against the penetration of rainwater.
• Do not add any additive to the mortar.
• Consumption per m2 can vary considerably depending on the planimetry of the support.

Use characteristics of Rustic Mortecril

• Application thicknesses of 2 - 4 mm.
• Cocking time: 10-20 minutes.
• Dry to the touch: 3-6 hours.
• Total hardening time: 12 - 24 hours.

How to use the Rustic Mortecril mortar

• The mortar is supplied ready for use.
• Before using, stir all the contents with a whisk until obtaining a homogeneous mass.
• Apply Motrecril Rústico with a stainless steel trowel or spray gun.

Rustic Mortecril execution conditions

• Apply in temperatures between 5 and 30º.
• Do not apply with direct insolation, strong wind, rain or wind.
• The supports must be flat, stable, resistant and clean.
• Application on supports of excellent planimetry.
• On highly absorbent or easily disintegrable supports, previously apply a layer of primer F-300 diluted with water (1 part F-300, 3 parts water).
• Apply in all cases a primer coat of Primer Mortecril and thus avoid possible transparencies, after 24 hours you can apply the rustic Mortecril.
• Use adhesive tape to delimit work joints or decorative pieces.
• In the case of applying in large areas, prevent additional labor to avoid the appearance of joints within the same surface.
• Do not interrupt the application once it has started, unless a working or decorative meeting can be held.