Pavex 3D Epoxy Self Leveling

€68.99

Tax included

Rate it

Capacity

Quantity

Pavex 3D Clear Epoxy Self-Leveling is 100% solvent-free and consists of 2 high-solids components. Recommended for application on all types of solid interior surfaces such as offices, shops, restaurants or cafes.

Features self-leveling Pavex 3D epoxy

This fully transparent self-leveling agent is perfect for application on surfaces where we want to show the background, such as a floor with an original drawing, which will allow us to give a different touch to the support. Tileable on all types of solid surfaces, provided they are completely dry.

Pavex 3D epoxy self-leveling technical data

Application temperatures: 15-30ºC
Relative humidity: less than 50%
Substrate humidity: less than 4%
Consumption: ± 1 kg / m 2 (1 mm thick)
Viscosity (25ºC): 600 +/- 120 Mp (spindle 2, rpm 60)
Flash point: More than 100ºC
Compressive strength (UNE 4279): 90 N / mm2
Flexural strength (UNE 4279): 80 N / mm²
Hardening in depth: 7 days (25ºC) 50% RH
Conservation: 12 months in original closed container (5 - 35ºC), sheltered from the elements and humidity
Maintenance and cleaning: Cleaning with neutral detergents

Preparation of the support

The support must have a mechanical resistance to compression> 25 N / mm2 and tensile> 1.5 N / mm2.
The supports must be solid, level and absorbent
They must not be contaminated with oils, detergents, powders or other substances.
Ceramic substrates must be sanded vigorously until a matt surface is obtained.
On floors already treated with resin, the perfect adhesion of the coating must be verified, in which case sand the surface and proceed with the application.

Pavex 3D epoxy self-leveling application

Join the components in the same container using a mixer at low revolutions for a period greater than 1 minute.
Quickly distribute the product with a notched trowel at a consumption of approximately 1 kg / m2 and mm thickness.
It may be necessary to use the barbed roller to smooth the surface and facilitate bubble removal.
Pigments compatible with the product can be used to color the product.
If Pavex 3D is applied at temperatures below 15 ° C, contact with water or water-based products may stain, resulting in less chemical resistance as a result of incomplete cure.