Liquid accelerator for mortars HORMIDUR 100
Accelerant that in cold environments (5-10ºC) reduces the wait before scraping single-layer mortars. When you do not want to lower production in times of winter temperatures. As protection of concrete at low temperatures.
The usual ones for the application of mortars and concretes.
RECOMMENDATIONS FOR APPLICATION
Do not apply a single-layer mortar on a frozen or freezing risk support. Not exceeding the recommended dose, this could alter the performance of the mortar. In mortars and concretes always use the same dosage. In dark tone monolayers, always use the same percentage, otherwise color changes may occur.
HOW TO USE
The dosage will vary between 3-5% on the weight of the cement, depending on the characteristics of the concrete or mortar, the ambient temperature or product, as well as the desired setting speed. It can be previously dissolved in the mixing water, but it is always advisable to carry out preliminary tests to determine the most suitable dosage.
For unarmed mortars and concretes. Chloride based. Improves setting in cold weather. Special for monolayer mortars. For quick stripping. Easy to use.
Nature: Inorganic salts Appearance: Transparent liquid Density: 1.3 DIN 51757 PH: 7 UNE EN 1262 Solubility in water: Total
28 kg plastic drum
672 kg pallets (24 drums)
12 months in original closed container, sheltered from the elements and humidity.
* For mortars, reinforced concrete and prestressed use Hormidur SC .