APPLICATIONSColored mortar for repairing, smoothing and decorating floors. New construction and rehabilitation
SUPPORTSHigh compression resistance concretes or mortars> 20 Nmm 2 . Thicknesses between 5-30 mm.
FINISHESSpot -sanding Pavicem micro mortar , Racly 2 , Orfapol 50 , Paviplast (epoxy) ... Synthetic coatings - Sports
RECOMMENDATIONS FOR APPLICATIONAlways respect the same percentage of water. Respect the minimum thickness required according to the types of supports. Respect the expansion (16-20 m 2 ), perimeter and fractionation joints. Application temperatures 5ºC to 25ºC
EXECUTION CONDITIONSThe support must be solid and hard, be dry, free of dust, from broken areas, paints, waxes and oils, oxides, traces of gypsum ... On weak cementitious bases and without guarantees, mill until the aggregate appears, vacuum and reinforce with Silicate hardener . On very smooth or porous substrates, mill until the aggregate appears, vacuum and apply a coat of F-300 quick primer. In all cases, on new or old concrete with compression> 20 N / mm 2 , mill the surface layer until the aggregate appears. Before pouring, apply 1-2 passes of F-300 Quick Primer. On new concrete, it will be completely set (≥ 28 days) before applying the Pavifluid Industrial .
HOW TO USE
- By pomping: 14-15%.
- Manual kneading:
1 bag of Pavifluid Industrial with 3.5 - 4 liters of water, until obtaining a homogeneous mass and without lumps.
- Use the barbed roller to remove air from the product.
- If necessary, smooth with a leveling trowel.