Escríbeme un Whatsapp
  • Pavifort SAN epoxy al disovlente

Epoxy sanitary paint to disoccupant Pavifort SAN

Tax included
Ask a question (0)

Product customization

Don't forget to save your customization to be able to add to cart
  • 250 char. max
  • 250 char. max

Pavifort-San is a 100% solid epoxy coating without solvents and with high chemical resistance, fully prepared for continuous contact with food. Recommended for tanks and silos for the containment of oils, wines and preserves, as well as pavements for the sanitary or food industries. It is available in 2 colors, red and ocher.

Pavifort-San employment characteristics

  • Application temperatures 10-35ºC
  • Maximum humidity support: 4%
  • Maximum relative humidity: 70%
  • Pot life (20ºC): 15 - 20 minutes
  • Dry to the touch (25ºC): less than 2 hours
  • Tack-free drying (25ºC): less than 6 hours
  • Time between layers: minimum 12 hours to maximum 24 hours
  • Full cure (25ºC):> 7 days
  • Full cure (15ºC):> 12 days
  • Available in red and ocher colors

Execution conditions with the Pavifort-San coating

  • On concrete: For optimal results, the concrete must have:
  • A strong and firm surface.
  • It is dry, free of grease and other materials.
  • Be fully set for at least 28 days and with less than 4% humidity.
  • In the preparation a sandblasting, sandblasting and water blasting, brushed with steel tines, acid pickling, with 10% solution and subsequent drying are recommended.
  • On smooth, non-absorbent surfaces ... sand before and open pore, to ensure a good anchorage.

How to use the Pavifort-San

  • Mix Component A homogeneously with a slow whisk and simultaneously pour the contents of Component B.
  • Important: once the mixture is ready, you have 15 to 20 minutes to apply.
  • Application can be done with: spray equipment, brush and roller

Coating applications

  • Coating based on 100% solid epoxy resins with high chemical resistance, formulated to be in contact with food products.
  • Inside tanks and silos, both concrete and steel, to contain oils, wines, preserves ...
  • Protection of pavements in sanitary industries, meat, pharmaceutical laboratories ...
  • Indoor.
  • Supports
    • Concrete and polished concrete.
    • Steel...
    • On drinking water pipes.

Pavifort-San coating

  • For food industry.
  • Solvent free.
  • For tanks and silos.
  • Without joints.
  • Product approved by the Ministry of Health and Consumption.
  • Available in red and ocher colors

Specific References

New product


Pavofort San datasheet

data sheet

Download (1)

Be the first to write your review !

No customer questions for the moment.

Your Question has been successfully sent our team. Thanks for question!
Ask a question
hide form