Anti graffiti PROTECT AG
Concentrated reactive silane-based water-repellent / oleofugant for the protection of facades against graffiti painting.
CONTAINERS: Plastic drums of 5 and 20 Ltrs
YIELD: Recommended: 0,300 grms / m2 and coat (1 layer). Recommended 2 layers.
COLORS: Transparent (full transparency)
HOW TO USE
Application temperature: 5 to 30ºC The substrate must be dry, healthy, clean and free of dust. The product is prepared for direct application. It can be diluted with universal solvent. Apply on sunny days. The application can be by spray or brush and with one coat should be sufficient. Proof of effectiveness: 24 hours after application and dry surface. OBSERVATIONS Avoid splashing in the eyes, mucosa and contact with the skin. Wear protective glasses and gloves. Protect all surfaces that are not going to be waterproofed with the product and / or supports that are not specifically cementitious. It does not alter the color of the treated surfaces. Resistant to different atmospheric agents. Good results as an anti-graffiti additive.
Flash temperature: 8ºC Density, 25ºC: 0.84 g / cm 3 Flammable product
* All the information described has been obtained from standard tests and may vary depending on the conditions of installation.
20-25ºC 12 months from the date of manufacture in the original closed container, sheltered from the elements and humidity.