Desincrustante para hormigones
High penetrating power, humectant and remover of cement residues. Eliminates salts, fats, moss and bacteria. Diluted in adequate proportions it does not attack painted surfaces.
RECOMMENDATIONS FOR APPLICATION
1) Saturate well with water
2) Dilute 1 to 4 (1 part of F-700 with 4 parts of clean water) and apply on the surface. Mortar and concrete remains:
1) Use dilutions 1 to 3 - 1 to 5 in clean water Marble, ceramic ...
1) Dilutions between 10 - 12 parts of clean water.
* All the information described has been obtained from standard tests and may vary depending on the conditions of installation.
HOW TO USE
Given its high concentration, use F-700 always diluted with water. Once the product has been lowered with water and during application, the surface to be cleaned must be thoroughly impregnated, leaving it to act for a few minutes and finally rinsing with plenty of clean water. In some cases it will be necessary to rub with the help of a strong and acid resistant brush. The degree of dilution with water will be variable depending on the material to be removed, degree of dirt ...
Application temperature 5-30ºC Use protective glasses and the appropriate gloves. It can cause burns in its purest form. Cleaning of exposed facades. Elimination of efflorescence. Construction waste cleaning
25 liter plastic jerry can
450 liter pallets (18 drums)