Escríbeme un Whatsapp
PAVIGROUT R3
  • PAVIGROUT R3
  • PAVIGROUT R3
  • fast repairing mortar from 0 to 30 mm

Pavigrout R3 repair mortar 0 to 40 mm

€21.72
Tax included
Ask a question (0)
Color
Quantity

PAVIGROUT-R3 - Quick repair mortar Repair mortar for walls and floors. Regularizes from 0 to 30 mm COLORS: Gray and White Bags: 25 Kg

DESCRIPTION

High resistance cements, selected aggregates, special additives and fiber reinforcement.

OBSERVATIONS

  • Dampen well before applying the Pavigrout Rapid-R3 .
  • Do not add any additive to the mortar.
  • Do not apply Pavigrout Rapid-R3 on plaster or painted surfaces.
  • Do not add water when the mass begins the setting process.
  • Do not apply where the water can remain stagnant.
  • When a second coat is required, apply before the first coat has set.

EMPLOYMENT CHARACTERISTICS

  • Rest time after kneading: 5 min.
  • Mass life: 30-60 min. (20ºC)
  • Maximum tolerated thickness: 3-15 cm (in 5 cm layers)
  • Start of setting: 2- 4 hours.

* These times are contemplated at 20ºC and may vary depending on the ambient temperature.

BENEFITS

  • Powder bulk density: 1.4 g / cm 3 .
  • Mixing water (in the laboratory): 20% .
  • Mass density: 1.7 g / cm 3 .
  • Direct tensile adhesion: > 1.5 MPa
  • Compressive strength: > 30 MPa .
  • Chloride determination: 0.01% .
  • Modulus of elasticity in compression: > 15 GPa .
  • Ice-thaw with salt immersion: > 2.0 Mpa .
  • Capillary absorption: <0.5 kg / (m 2 xh 05) .
  • Fire behavior: A1 Euroclass .

* These results have been obtained under standard conditions and may vary depending on the installation.


PRODUCT

Thixotropic. Armed with fibers. Suitable for concrete sanitation. Controlled retraction mortar. High immediate resistance. Without fissures.

PRESENTATION

  • 25 kg paper bags, anti-humidity.
  • 1200 kg pallets (48 bags).

COLORS

  • White and grey.

CONSUMPTION

  • 1.4 kg / m 2 and mm thickness.

CONSERVATION

  • 12 months from the date of manufacture, in the original closed container, protected from the elements and humidity.

EXECUTION CONDITIONS

  • The supports must be healthy, stable and resistant, free of dust, plaster, paint ...
  • Remove deteriorated and degraded concrete, until reaching the solid, resistant and rough support.
  • Before applying the Pavigrout Rapid - R3 , wet to saturation and apply when the surface is free of water.
  • In structural repairs and with the appearance of the reinforcement, sandblast clean, remove dust and cover with Pavifer anti-corrosion mortar, allow to dry for at least 1 hour.
  • On surfaces without absorption, very smooth or little absorbent, strip and open pore to ensure good adhesion.
  • Avoid applying the coating in low temperatures, strong humidity, rain ... In the hours that follow the application of the mortar, the risk of the appearance of efflorescence due to carbonation increases.

HOW TO USE

Manual kneading:
• Mix a bag of Pavigrout-R3 (25kg) with 5-6 liters of clean water until you get a homogeneous mass. Machine projected:
• Mix the mortar with 20-22% of clean water.
* In areas where the armor iron appears, clean and apply Pavifer anti-corrosion mortar, let it dry for at least 1 hour. • Apply the final coat of Pavigrout Rapid-R3 , remove the excess with the trowel and trowel.
• Place the fiberglass or metal mesh in areas with risk of cracks. APPLICATIONS
  • Repair of columns, girders, cantilevers, pillars, balconies, degraded areas of concrete ..., due to the corrosion of reinforcements and the need for rapid setting.
  • Filling of cracks and external coatings of buildings.
  • For repairs that need urgent commissioning, such as plaster edges, junction of manholes or pipes and repairs of coconuts.
  • Indoors and outdoors.

FINISHES

  • Concrete and cement mortars.
  • Standard concrete block.

RECOMMENDATIONS FOR APPLICATION

  • Application temperatures between 10 -30ºC.
  • The percentage of water may vary depending on the mixer used.
  • In areas where the armor iron appears, clean with sandblasting or a metal brush, cover with Pavifer mortar and let it dry for at least 1 hour.
  • Do not apply Pavigrout Rapid-R3 on smooth concrete supports (before roughing and opening pore).
  • Do not use by casting for fillings.
  • Remove deteriorated concrete, with possible detachment until reaching a solid support.

PAVIGROUT-R3

APPLICATIONS

Repair of columns, girders, cantilevers, pillars, balconies, degraded areas of concrete ..., due to the corrosion of reinforcements and the need for rapid setting. Filling of cracks and external coatings of buildings. For repairs that need urgent commissioning, such as plaster edges, junction of manholes or pipes and repairs of coconuts. Indoors and outdoors

SUPPORTS

Concrete and cement mortars Standard concrete block APPLICATION RECOMMENDATIONS

Application temperatures between 10 -30ºC In areas where the armor iron appears, clean with sandblasting or a metal brush, cover with Pavifer mortar and allow to dry for at least 1 hour. Do not apply Pavigrout Rapid-R3 on smooth concrete supports (before roughing and opening pore). Do not use by casting for fillings. Remove deteriorated concrete, with possible detachment until reaching a solid support.

EXECUTION CONDITIONS

The supports must be healthy, stable and resistant, free of dust, plaster, paint ... Remove deteriorated and degraded concrete, until reaching the solid, resistant and rough support. Before applying the Pavigrout Rapid - R3 , wet to saturation and apply when the surface is free of water. In structural repairs and with the appearance of the reinforcement, sandblast clean, remove dust and cover with Pavifer anti-corrosion mortar, allow to dry for at least 1 hour. On surfaces without absorption, very smooth or little absorbent, strip and open pore to ensure good adhesion. Avoid applying the coating in low temperatures, strong humidity, rain ... In the hours that follow the application of the mortar, the risk of the appearance of efflorescence due to carbonation increases.

HOW TO USE

Manual kneading:

  • Mix a bag of Pavigrout Rapid-R3 (25kg) with 5-5.5 liters of clean water until you get a homogeneous mass.
  • Machine projected:
    Mix the mortar with approximately 20% clean water.

In areas where the armor iron appears, clean and apply Pavifer anti-corrosion mortar, let it dry for at least one hour

Apply the final coat of the Pavigrout Rapid-R3 , remove the excess with the trowel and trowel.

  • Place the fiberglass or metal mesh in areas of risk of cracking.
  • OBSERVATIONS

  • Dampen well before applying the Pavigrout Rapid-R3 .
  • Do not add any additive to the mortar.
  • Do not apply Pavigrout Rapid-R3 on plaster or painted surfaces.
  • Do not add water when the mass begins the setting process.
  • Do not apply where the water can remain stagnant.
  • When a second coat is required, apply before the first coat has set.
Thixotropic Suitable for concrete sanitation Controlled retraction mortar High immediate strength Fiber reinforced Seamless

EMPLOYMENT CHARACTERISTICS

Rest time after kneading: 5 min. Mass life: 30-60 min. (20ºC) Maximum tolerated thickness: 3 -15 cm (in layers of 5cm) Start of setting: 2- 4 hours

* These times can vary considerably depending on the ambient temperature.

BENEFITS

EN 1504-3

Powder bulk density: 1.4 g / cm 3 Mixing water: 22% Bulk density: 1.7 g / cm 3 Tensile adhesion: ≥ 1.5 MPa 28-day compression: ≥ 25 MPa Flexural traction: ≥ 7.0 MPa Modulus of elasticity in compression: ≥ 15 GPa Ice-thaw in salts: ≥ 1.5 Mpa Capillary absorption: ≤ 0.5 kg / (m 2 xh05)

* These results have been obtained under standard conditions and may vary depending on the installation.

PRESENTATION

25 kg paper bags, anti-humidity.
1200 kg pallets (48 bags)

COLORS

White and grey

PERFORMANCE

1.4 kg / m 2 and mm thickness

CONSERVATION

6 months from the date of manufacture, in the original closed container, sheltered from the elements and humidity.

26010

Specific References

New product

Download

Pavigrout R3 datasheet

Download (1)

Seg Token Pavigrout R3

Download (1)

Pavigrout R3 test

Download (1)

Be the first to write your review !

No customer questions for the moment.


Your Question has been successfully sent our team. Thanks for question!
Ask a question
hide form
Captcha