3C Ecopox multilayer epoxy mortar

3C Multilayer Ecopox Features

Ecopox mortar is a 3-component, water-based epoxy resin-based product.

• A - Amine resin in aqueous vehicle.
• B - epoxy resin.
• C - Pre-made based on post-treated metal granules and inorganic additives.

The mortar makes it possible to obtain coatings with high resistance to wear even at minimum thicknesses. It is capable of hardening in the presence of moisture and has excellent permeability characteristics.

Technical data of the 3C multilayer Ecopox

• Application temperatures: 10-30 ° C
• Consumption: 500 - 600 g / m 2 (1 layer)
• Color: Silver, red, green and black.
• Packaging: Pack (A + B + C): 22.5 kg.
• Dosage between the components: A = 45, B = 30, C = 150
• Dry to touch (50% RH): 5 ° C: 15-18 hours 25 ° C: 8-10 hours 30 ° C: 4-5 hours.
• Passable (50% RH): 25 ° C:> 8 hours.
• Cleaning of the tool: Water.
• Conservation:
  • 6 months for component C.
  • 12 months A + B components, in closed original packaging (5-35 ° C), sheltered from the elements and humidity
  • Component B, sensitive to air humidity

How to use the 3C multilayer Ecopox

• Mix components A + B with a mixer at low speed for at least 2 minutes, add component C and mix for approx. 1 minute, until perfect homogenization is obtained.
• The application can be done with a steel, rubber trowel ...

Preparation of the support for the 3C multilayer Ecopox

• The concrete bottoms must be solid, level, absorbent, not contaminated with oil, dust or other substances. The most convenient type of mechanical preparation must be carried out (abrasive machine, sander or high-pressure cleaner) and then apply a coat of Transparent Paviplast Epoxy.
• The oily surfaces must be roughened to depth and treated with a mixture of Pavex 2C Primer + quartz or on the newly applied resin, sprinkle the quartz to saturation. The same solution can be adopted to smooth out the irregularities of the support such as the grooves left by the roughing machine, to consolidate funds and ensure a guarantee of solidity.
• On new concrete that sets for more than 28 days.

Features of the 3C multilayer Ecopox

• Specific gravity: 2.5 +/- 0.1 g / ml
• Viscosity: 4,000 +/- 800 Mp (sprindle 3, rpm 5)
• Compression (More than 7 days): 55 N / mm2
• Flexural load (More than 7 days): 25 N / mm2
• Dry residue: 84.3% by weight.

Using the 3C Multilayer Ecopox

• For industrial flooring with strong surface wear.
• In pavements of warehouses and commercial premises subject to high traffic.
• Indoor.

PD Ecopox multilayer 3C

• This treatment reduces the breathability of the lining.
• The tile bottoms must be roughly roughened.
• Unbonded tiles must be removed, and restored with Pavirapid.
• Uneven surfaces can be smoothed by flush with Pavex 2C Primer + Quartz.